SECOND HAND – SQUADRATRICE/BISELLATRICE «SQUADRA DRY» a secco. AND SLEEVES FILTER
» 120 Sleeves »
WITH ALL OVERHAULED MANDRELS
SERIAL NUMBER – AH0000100C
For Maximum Sizes 1200x 1800, Minimum Size 150×300, 150×600, 150×1200, 400×400, 500×500,600×600.
Power supply
1. Supply voltage: depending on country (FM400V – 50Hz)
2. Command voltage: 110Vac and 24Vdc
3. Protection class: IP 55
4. System design: according to CE standards, except for noise level
5. Operating temperature Q.E.: +5 / +35 °C
6. Compressed air: 6 Bar
7. Cooling water tools: 1 Bar
Dry squaring/chamfering unit model «SQUADRA 12/1″ TOP SQUADRA DRY» composed of:
Nr 2 modules with intermediate swivel, made with sturdy electro-welded steel structure and perfectly worked to ensure maximum precision during processing.
First module, for sizes 150 – 1200 mm, complete with:
Nr 12+12 side calibrator motors mounted opposed, prepared for front wheels up to Ø 300mm, equipped with handwheel for micrometric adjustment.
Nr 1+1 floating 45° bevelling motors, diamond recovery handwheel and pneumatic return.
All calibrator and bevel motors are equipped with a special protective casing and lower hoods for dust collection. The aforementioned hoods are connected to the central suction and powder conveying pipe to the bag filter.
The locking and dragging of the tile during processing takes place by means of two lower toothed belts and two upper toothed belts mounted on wear guides. The working pressure on the upper belts is exerted by pneumatic cylinders.
The movement of the spindle crossbars takes place through a gearmotor controlled by an inverter
Towing unit by means of gearmotor, controlled by inverter, with double output that ensures the same speed to the lower and upper belts.
At the entrance to the module, a device is installed for automatic centering of tiles relative to the axis of the machine.
Pneumatic panel with pressure regulation controls on the belts and bevelling balancing.
5 m long connection line with painted steel support frame, complete with towing groups by means of gearmotor controlled by inverter and swivel for the 90° rotation of the tile with special double belt and double motorization controlled by inverter
Towing unit by means of gearmotor, controlled by inverter, with double output that ensures the same speed to the lower and upper belts.
At the entrance of the module is installed a device for the automatic centering of the tiles with respect to the axis of the machine, pusher controlled by a gearmotor managed by an inverter with encoder for alignment and positioning of the tile at 90 ° with respect to one of the sides already processed.
Mesh protection with pusher doors
Pneumatic panel with pressure regulation controls on the belts and bevelling balancing.
Electrical system complete with PLC, touch screen operator interface with machine messages and parameters, production data, machine error regulation.
Please note: The electrical panel is positioned 3 m from the axis of the line, at the intermediate belt transport, with cable routing channel on the ground. Any movements must be quoted separately.
Technical data:
Front calibrator motor power: 5,6 kW. Bevelling motor power: 2,4 kW. Total installed power: 284 kW.
Nr. 1 Variant for minimum size less than 200×200 composed of insertion of belt walker with double motorization, locking device and material alignment, 4-belt transport and various modifications to the squaring machine.
Nr. 1 Variant for maximum size 600×1200 mm with 2nd module enlargement of 600 mm. and extension to 4.5 Mt. of the connection with swivel.
Nr. 48 Digital ammeter for calibrator motor absorption control. Complete with a column support placed at the top center of the calibration module to ensure maximum visibility to the operator from all sides of the machine. Electrical materials for installation and wiring on the machine.
Nr. 1 Inverterization variant of 2+2 calibrator motors (2 on the 1st module and 2 on the 2nd module) controlled in pairs by nr. 2 inverters of 11 kW each (the 2nd pair of each module is reversed).
The amendment includes;
Replacement of nr. 4 contactors with nr. 2 x 11 kW inverters with EMC filter
Short circuit protection with 2 three-pole fuse holders10x38.
Replacement of nr. 4 magnetothermic with 4 thermal protections for overload.
Replacement of normal cables with shielded cables for inverters. Carpentry surcharge to accommodate additional inverters
Power supply
Supply voltage: depending on country
Command voltage: 110Vac and 24Vdc
Protection class: IP 55
System design: according to CE standards, except for noise level
Operating temperature Q.E.: +5 / +35 °C
Compressed air: 6 Bar
Cooling water tools: 1
Scrivici su Whatsapp